Read the User Manual carefully before using the Cargolog Impact Recorder System. This will protect you personally and avoid damage to the unit.
Copying or reproduction of this User’s Manual in part or in whole without prior authorization is strictly prohibited.
Specifications, design and any other information included in this User’s Manual may be revised without prior notice.
To the best of our knowledge, this User’s Manual is accurate at the time of printing, but should you encounter any omissions or inaccuracies, please contact your dealer or our Customer Support.
Please handle with care as the excessive direct impact may damage this product.
In no event will Mobitron be liable for any direct or indirect damages of any kind incurred by the results of using this product.
This product is designed and manufactured to ensure high reliability, however, absolute operation guarantee is not possible. If this product use is intended for providing proof for compensation for damages or insurance claims of high value, the use of multiple products is recommended.
Mobitron will not be liable for any damages incurred if the user does not use the product correctly, or has handled it in any way other than described herein, or has tampered with or changed it in any way, or if it has been repaired or changed in any way by a third party.
This product is designed to be used while attached and packaged with the object to be measured.
The Data Logger System is a universal data logger for measuring and recording different physical measurement parameters and may not be used for safety-related applications,
Do not use the Data Logger in the area affected by acid, alkaline, organic solvents, corrosive gases, etc.
This product is not intended for monitors and such equipment relevant to human and animal lives.
Repairing or Modifying
The Data Logger must never be opened or modified. The Mobitron AB cannot be held liable for damage resulting from use other than that for which the unit is intended, or from improper operation of the unit.
If the product has been submerged in water, punctured, or seriously damaged do not use it before returning it to the Mobitron AB.
Connectors and Ports
Before using the data Logger check the unit itself and all cables for visible signs of damage and never operate a damaged data Logger.
Never force the connector into a port; check for the obstruction, make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port,
If the connector and port do not join with reasonable ease, they probably do not match and should not be used.
You must dispose of Mobitron’s products according to relevant laws and regulations. Mobitron’s products contain electronic components and lithium batteries and therefore they must be disposed of separately from household waste.
The Cargolog system can be operated by alkaline or lithium metal battery; for information of the specification for your product please contact Mobiton before using any battery.
Never use a data Logger with a leaking battery. Should a battery leak be detected ensure that the electrolyte does not come into contact with the skin, the eyes or the mouth. Should this occur, thoroughly rinse the affected area with water for at least 15 minutes. Consult a doctor.
Do not recharge, short circuit, crush, disassemble, heat above 100°C (212° F), incinerate, or expose contents to water,
Do not solder directly to the cell (use tabbed cell versions instead.)
We welcome your questions and comments Contact us
You can contact us at +46 (0)36 512 25 or If you would like one of our specialists to contact you, please fill out the form and we will be in touch with you within the shortest time.