{"id":1173,"date":"2023-11-01T02:02:26","date_gmt":"2023-11-01T01:02:26","guid":{"rendered":"https:\/\/mobitron.com\/?page_id=1173"},"modified":"2024-02-27T09:31:32","modified_gmt":"2024-02-27T08:31:32","slug":"modalita-di-funzionamento-dei-led","status":"publish","type":"page","link":"https:\/\/mobitron.com\/it\/led-function-modes\/","title":{"rendered":"Led function modes"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

LED functions<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The LEDs on the Cargolog\u00ae device, 2nd Gen have several sequential modes to report different situations. Depending on how the LEDs light up when you press the button, you will know the mode of the Cargolog\u00ae device. Press the button with your finger, a pen, or a similar object.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tContact us<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tDownload PDF instructions<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"LED\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

LED modes<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tActivation<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tMode A<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tMode B<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tMode C<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tMode D<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tMode E<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\tMode F<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Mode:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Initiating the recording period<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

To start the recording for the Cargolog\u00ae device with pre-configured settings on the 2nd Gen device, follow these steps:<\/span><\/p>

  1. Press and hold the button for 15-20 seconds (keep the button pressed throughout the entire sequence).<\/span><\/li>
  2. All LEDs will illuminate and then turn off.<\/span><\/li>
  3. The LEDs will sequentially light up one at a time from right to left, indicating the start of the recording (Angle, Temp, Rh, Acc).<\/span><\/li>
  4. Release the button after the sequence completes to initiate the measurement period.<\/span><\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"actication\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t
    \n\t\t\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Mode A:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Not programmed<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    If the Cargolog\u00ae device has not been programmed. To check its status:<\/span><\/p>

    1. Press the button, and observe all LEDs lighting up for 3-4 seconds.<\/span><\/li>
    2. After releasing the button, note that all four LEDs will blink ten times within 3-4 seconds.<\/span><\/li><\/ol>

      Please be aware that there may be a brief delay between releasing the button and the commencement of the LED blinking sequence.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Mode\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t\t
      \n\t\t\t
      \n\t\t\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      Mode B:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t

      Programmed but not active<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      The Cargolog\u00ae device is programmed but not started.<\/span><\/p>

      1. While the button is pressed, all LEDs on the Cargolog\u00ae device illuminate for 3-4 seconds.\u00a0<\/span><\/li>
      2. Upon releasing the button, all LEDs go out.\u00a0<\/span><\/li><\/ol>

        The Cargolog\u00ae device has been programmed but is not actively recording or monitoring impacts. It remains in a standby or inactive mode. This separation between programming and activation allows users to set up the device with specific parameters before putting it into active use.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Mode\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t
        \n\t\t\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t

        Mode C:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t

        Active with no exceeded alarm limits<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        The Cargolog\u00ae device is active and operational, with a recording exceeding predefined alarm limits. To verify its status:<\/span><\/p>

        1. Press the button, and observe all LEDs lighting up for 3-4 seconds while the button is held.<\/span><\/li>
        2. Release the button to trigger two sequential sequences: the LEDs representing angle, temperature, and humidity illuminate one at a time from right to left.<\/span><\/li><\/ol>

          This functionality is available with Firmware version \u22652.8.1.0. Check the firmware by connecting to the software. For more information, see the manual.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Mode\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t
          \n\t\t\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t

          Mode D:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t

          Active with exceeding alarm limits<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t

          The Cargolog\u00ae device is active and operational, with a recording exceeding predefined alarm limits. To verify its status:<\/span><\/p>

          1. Press the button, and observe all LEDs lighting up for 3-4 seconds while the button is held.<\/span><\/li>
          2. Release the button to trigger two sequential sequences: the LEDs representing angle, temperature, and humidity illuminate one at a time from right to left.<\/span><\/li>
          3. The LED corresponding to the sampling channel that exceeded the alarm limit will stay lit for 5 seconds.<\/span><\/li><\/ol>

            This functionality is available with Firmware version \u22652.8.1.0. Check the firmware by connecting to the software. For more information, see the manual.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Mode\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t\t
            \n\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t

            Mode E:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t

            Measuring cycle ended with no exceeded alarm limit<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t

            The measurement cycle has concluded, and sampling has ended, with no exceeding alarm limits. Check the status as follows:<\/span><\/p>

            1. Press the button, and all LEDs illuminate for 3-4 seconds.<\/span><\/li>
            2. The acceleration LED blinks for 4-5 seconds after releasing the button.<\/span><\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Mode\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t\t
              \n\t\t\t
              \n\t\t\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t

              Mode F:<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t

              Measuring cycle ended with exceeded alarm limits<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t

              The measurement cycle has concluded, and sampling has ended, with a recording of exceeding predefined alarm limits. Verify the status as follows:<\/span><\/p>

              1. Press the button, and all LEDs illuminate for 3-4 seconds.<\/span><\/li>
              2. Upon releasing the button, the LED corresponding to the measuring channel that exceeded the alarm limit will stay lit for 5 seconds.<\/span><\/li>
              3. The acceleration LED blinks for 4-5 seconds.<\/span><\/li><\/ol>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
                \n\t\t\t
                \n\t\t\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Mode\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

                LED functions The LEDs on the Cargolog\u00ae device, 2nd Gen have several sequential modes to report different situations. Depending on how the LEDs light up when you press the button, you will know the mode of the Cargolog\u00ae device. Press the button with your finger, a pen, or a similar object. Contact us Download PDF […]<\/p>\n","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"elementor_header_footer","meta":{"_acf_changed":false,"content-type":"","inline_featured_image":false,"footnotes":""},"class_list":["post-1173","page","type-page","status-publish","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/mobitron.com\/it\/wp-json\/wp\/v2\/pages\/1173","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mobitron.com\/it\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/mobitron.com\/it\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/mobitron.com\/it\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/mobitron.com\/it\/wp-json\/wp\/v2\/comments?post=1173"}],"version-history":[{"count":58,"href":"https:\/\/mobitron.com\/it\/wp-json\/wp\/v2\/pages\/1173\/revisions"}],"predecessor-version":[{"id":4839,"href":"https:\/\/mobitron.com\/it\/wp-json\/wp\/v2\/pages\/1173\/revisions\/4839"}],"wp:attachment":[{"href":"https:\/\/mobitron.com\/it\/wp-json\/wp\/v2\/media?parent=1173"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}