Cargolog® Impact Recorder System

Cargolog® Impact Recorder System, a wireless data logger, can help you measure and register potential accidents that can result into damaging your product. The data logger is attached directly onto your goods and provides you with information regarding how your products are being handled throughout the entire logistics chain – from start to finish.

Why Cargolog® Impact Recorder System?

Transport damage is an often-cited cause of product damages. The repercussions of damages to your product are not only related to immediate cost of repairs, replacements and delays, but also to premature failure during the components lifetime, extra service costs, loss of productivity and damage to the company’s reputation. Therefore, it is important to determine how to eliminate and reduce these costs at an early stage. Cargolog® Impact Recorder System offers you four systems for supervision of your goods.

  • Get full control of your goods during the entire logistic chain

  • Reduce the cost of potential damages during transport and specify potential areas for improvement in the logistic chain

  • Allows the receiver to react on mishandling of transportation before installation or use

  • Identify optimal transports, routes, packaging, storage options and delivery conditions

Data loggers – the four systems

System #0

Limited functions

System #0 measures and records acceleration, duration of the acceleration and temperature with built-in sensors. This is our simplest model available for those who does not require any extra features.

Find data logger >>>

System #1

Standard

System #1 measures and records acceleration, the duration of the acceleration, temperature, humidity and angle with built-in sensors. This is our standard
system.

Find data logger>>>

System #2

GPS

 

System #2 measures and records acceleration, the duration of the acceleration, temperature, humidity and angle with built-in sensors. Equipped with: integrated GPS receiver.

Find data logger>>>

System #3

GSM/GPRS/GPS

  

System #3 measures and records acceleration, the duration of the acceleration, temperature, humidity and angle with built-in sensors. Equipped with integrated GPS and GSM/GPRS for communication of data i real-time.

Find data logger>>>

How does it work?

Set up Impact Recorder

Cargolog® Impact Recorder is used for supervision of goods during transport to measure and register potential damages. Before transport the impact recorder is pre-programmed with acceptable values for the measuring channels you want to register during transport. This is done with your PC from CargoLog® PC software. This means that for each journey, you can set which measurement channels will be used and adjust these based on the goods’ prerequisites, method of transport and period of time.

Measure and register

When the impact recorder is set up, affix the impact recorder to your goods, allowing it to follow throughout the entire logistics chain. All measurement data is stored and protected electronically in an internal memory, which means that it is not lost if your battery loses power during transportation. All measurements include the time, as well as duration and can be password protected.

Analyze data

At the arrival you will immediately be able to check for exceeded limits by checking the LED lights on your impact recorder. The measuring results can be collected from your impact recorder with Cargolog® PC software to your PC, alternatively you can use your smartphone to transfer data via bluetooth from your impact recorder to our APP. All measuring results are then displayed in a diagram and can be analyzed second by second.

Specifications / Impact Recorder

Cargolog® Impact Recorder with built-in sensors measure and register acceleration and shocks (0,3-10G, resolution 0,01G 0,5-20Hz, ± 3.0&FS) and angular sensor (0-90°, resolution 5°) with Mikro Elektro Mekaniska System (MEMS). Digital sensors measure and register temperature (-40°C to 85 °C ± 0.5°C) and humidity (0-100% ± 3%) with high accuracy and stability.

Options

Your Impact recorder can be equipped with a variety of options to suit your preferences. To read more about each option, click on the icons to the right.

  • Bluetooth
  • ZigBee Communication
  • External Switch
  • Bottom IR Connection
  • Internal GPS Antenna
  • Pressure sensor
  • Extended memory capacity
  • Detailed vibration analysis
  • CAN Bus
  • Alkaline batteries

We look forward to meeting you at Coiltech 2018!

We have received tremendous feedback and ideas from you at different events; now we are preparing for the Coiltech exhibition 2018 in Pordenone, Italy between 26-27 september.

New software version CargoLog 5.9.11.3 available for download

Download CargoLog PC Software version 5.9.11.3 for an even more user-friendly interface.

Thank you for visiting our stand 22F42 at the CWIEME exhibition in Berlin

We would like to thank you for spending your time visiting our stand and meeting us at this year’s CWIEME Berlin.

CWIEME Berlin 19-21 June 2018

Would you like to get more information, do you already have a specific project in mind, or would you like to know more about Mobitron? The exhibition will also be an occasion to get the latest information about the products we offer. We will be demonstrating different models of Impact and Shock Recorders and highlighting our new technologies. Get a demonstration of Cargolog Online, our cloud service or test our new APP for Smartphone’s/tablets.

Contact Mobitron

Monitor your transport
– Industry solutions

Cargolog® Impact Recorder System can help you monitor your transport and effectively reduce costs and damages. Click on the pictures beside to read about your specific industry solution.

Did you not find your industry solution? Please contact us and we will give you more information how Cargolog® Impact Recorder System can be used in your industry.